10 A load-current limit
Published at 25 °C and subject to the datasheet derating curve.
SLO24CRXSN
DC input, DC load — 10 A signal relay
Nominal input
24 V DC
Load voltage
24 V DC
Load current
10 A
Warranty
10 years
53,01 €
Manufacturer's recommended price. Delivery terms: EXW Nummela, Finland.
10-year warranty
ISO 9001:2015
Technical specifications
Main data
| Nominal input voltage | 24 V DC |
|---|---|
| Nominal load voltage | 24 V DC |
| Rated load current | 10 A |
| Contact type | N/O, solid state |
| Coil type | DC |
| Load circuit | DC |
| EAN / GTIN | 6410027185163 |
| Application | For resistive loads only |
Why choose SLO24CRXSN
Built for a defined industrial duty
Use SLO24CRXSN when a nominal 24 VDC controller output must switch a 24 VDC load up to the published 10 A limit. The integrated screw-terminal socket simplifies installation while the solid-state output avoids mechanical contact wear.
Resistive and slightly inductive loads
Inductive use is allowed within the L/R limits and requires a clamp diode.
Integrated DIN-rail socket
A complete screw-terminal relay assembly for a standard 35 mm rail.
Status LED
Local indication is integrated into the relay assembly.
Application guidance
Use it where its strengths matter
Suitable applications
- High-current 24 VDC resistive loads
- Slightly inductive loads within the published L/R limits
- Control cabinets needing an integrated DIN-rail relay assembly
- Applications requiring frequent, contactless DC switching
Check before selection
- The 10 A maximum is specified at 25 °C; apply the published temperature and bank-mounting derating.
- For inductive loads, use a clamp diode and stay within L/R 0.5 ms at 32 V / 10 A or L/R 2 ms at 24 V / 5 A.
- Maximum load voltage is 80 VDC; nominal load voltage is 24 VDC.
- Use a correctly rated fast fuse, copper conductors rated for 60/75 °C and 0.5–0.6 Nm terminal torque.
Delcon design advantage: the control command crosses a pulse-transformer isolation barrier instead of an optocoupler. See how Delcon technology works →
Complete the assembly
Related products and variants
SLO24CR3 A plug-in DC output relaySLO24CRA55 A high-voltage DC output relayMOS1GNScrew-terminal socket for compatible plug-in output relays
SLO24CRXSN already includes its DIN-rail socket. The related plug-in products are alternatives for applications where a separate replaceable relay and socket arrangement is preferred.
Engineering resources
Datasheet and 3D model
Frequently asked questions
SLO24CRXSN selection basics
Is SLO24CRXSN only for resistive loads?
No. The current datasheet specifies resistive and slightly inductive loads. Inductive loads must remain within the published L/R limits and use a clamp diode.
Can it carry 10 A continuously?
The datasheet gives 10 A as the maximum at 25 °C. The permitted current must be reduced according to ambient temperature, mounting density and duty cycle.
Does it need a separate socket?
No. SLO24CRXSN is a DIN-rail relay assembly with an integrated screw-terminal socket.
How should it be protected?
Use a fast fuse correctly rated for the load and relay capacity, and follow the datasheet requirements for wiring, cooling, derating and terminal torque.
✓ Source: SLO24CRXSN datasheet · Technically reviewed by Delcon Oy · Review date: 7 October 2026
Confirm SLO24CRXSN against the real current, inductance, duty cycle and ambient temperature.
Send Delcon the control voltage, load data, switching frequency, protection and installation conditions.